AtermらくらくQRスタート for Android

by NEC Platforms, Ltd.


Strumenti

libero



You can connect setting and Aterm (Etamu) wireless LAN base unit by reading the QR code.

Per saperne di piu

製品添付の「らくらくQRスタート用QRコード」をアプリで読みとることで、Atermシリーズ親機のWi-Fi接続設定が簡単にできます。「らくらくQRスタート用QRコード」は、ネットワーク名(SSID)や暗号化キー(パスワード)の情報を暗号化しており、操作が簡単なだけでなく、セキュリティも配慮しています。「らくらくQRスタート 2」機能に対応したAterm製品は、Wi-Fi接続とインターネット接続設定がアプリで行えます。【対応バージョン】・Android 4.4以上(Google Playに対応し、カメラ機能に対応しているスマートフォン・タブレット端末でご利用いただけます)詳細な対応バージョンは、AtermStation(https://www.aterm.jp/product/atermstation/special/rakuraku_qr/index.html)をご確認ください。【接続確認機種】接続確認スマートフォン・タブレット端末、Atermシリーズ対応機種はAtermStation(https://www.aterm.jp/product/atermstation/special/rakuraku_qr/page3.html)をご確認ください。【注意事項】・読み込みに使用する「らくらくQRスタート用QRコード」は製品によって添付場所が違います。各製品の取扱説明書等で添付場所をご確認ください。・オートフォーカス機能がないカメラや、解像度が低いカメラでは、QRコードが認識できないことがあります。・スマートフォンやタブレットの拡大表示機能を使用している場合、カメラビュー画面内のQRコード読み取り枠の表示が、画面中央からずれる場合があります。通常表示に戻してから本アプリを再度実行してください。・ご利用の端末のカメラでQRコードが読み取りにくい場合は、下記をお試しください。-QRコードに対して垂直になるようカメラの位置を調整する。-読み取り時にQRコードに天井灯等が映りこまないよう調整する。-明るい場所で読み取りを行う。(直射日光等の明るすぎる場所は避ける)・AtermのSSID、暗号化キーが初期値の状態で設定できます。初期値から変更されていると設定できません。・事前に接続するAtermのファームウェアが最新になっていることをご確認ください。最新でない場合はバージョンアップを行ってください。・製品が子機モード、中継機モードで動作している場合は設定できません。・QRコードが認識できない場合やアプリケーションをダウンロードできない場合には、スマートフォン・タブレットから手動でWi-Fi設定を行ってください。詳しい設定方法はAtermのマニュアルをご覧ください。○「らくらくQRスタート 2」のみ・PPPoEルータモードの場合は、ID/パスワードの入力が必要です。・インターネット接続設定でPPPoEの設定を行う場合、全ての設定が完了するまで、約10分程掛かる場合があります。・インターネット接続設定時に、IPアドレスの競合を検出した場合、設定に失敗することがあります。その場合は、AtermのWEB設定画面で設定を行ってください。・設定を変更されている場合は、設定情報を見直してください。またはAtermを初期化して、工場出荷時の設定に戻して再度アプリを実行してください。・接続設定済みの他のアクセスポイントが近くにある環境では、設定に失敗することがあります。その場合は、設定するAterm以外のアクセスポイントの電源を切ってください。・ブリッジモード、アクセスポイントモード、ルータの多段接続では、インターネット接続設定が正しく行えません(Wi-Fi設定は行えます)。・ルータ再起動後、Wi-Fi接続が完了しないスマホは、インターネット接続設定ができません。(Wi-Fi接続設定はできます)・メールでお問合せされる際には、「[email protected]」が受信可能となるよう、ご利用のメールのフィルタリング設定をされるよう、お願いいたします。また、本アプリ以外のお問い合わせには、お答えできない場合がありますのでご承知おきください。※QRコードは(株)デンソーウェーブの登録商標です。※この製品にはOpenSSLツールキットを利用するためにOpenSSLプロジェクトによって開発されたソフトウェアが含まれています。By reading the "Easy QR Start QR Code" attached to the product with the application, you can easily configure the Wi-Fi connection settings of the Aterm series base unit."Easy QR Start QR Code" encrypts the information of network name (SSID) and encryption key (password), and is not only easy to operate, but also considers security.For Aterm products that support the "Easy QR Start 2" function, Wi-Fi connection and Internet connection settings can be performed with the application.[Supported version]・ Android 4.4 or higher (Available for smartphones and tablets that support Google Play and support the camera function)Please check AtermStation (https://www.aterm.jp/product/atermstation/special/rakuraku_qr/index.html) for detailed supported versions.[Connection confirmation model]Connection check Please check AtermStation (https://www.aterm.jp/product/atermstation/special/rakuraku_qr/page3.html) for smartphones / tablets and Aterm series compatible models.【Notes】-The location of the "Easy QR Start QR Code" used for reading differs depending on the product. Check the attachment location in the instruction manual of each product.・ QR codes may not be recognized by cameras without the auto focus function or cameras with low resolution.・ When using the enlarged display function of smartphone or tablet, the display of the QR code reading frame in the camera view screen may be shifted from the center of the screen. Please return to normal display and execute this application again.・ If it is difficult to read the QR code with the camera of your terminal, try the following.-Adjust the camera position so that it is perpendicular to the QR code.-Adjust so that ceiling lights etc. are not reflected in the QR code when scanning.-Scan in a bright place. (Avoid places that are too bright such as direct sunlight.)-Aterm SSID and encryption key can be set with default values. It cannot be set if it has been changed from the initial value.・ Check that the firmware of the connected Aterm is the latest. If not, please upgrade.・ This cannot be set when the product is operating in Remote Unit mode or Repeater mode.・ If the QR code cannot be recognized or the application cannot be downloaded, manually configure the Wi-Fi settings from your smartphone or tablet. See the Aterm manual for detailed settings.○ "Easy QR Start 2" only・ In the case of PPPoE router mode, you need to enter ID / password.・ When setting up PPPoE in Internet connection settings, it may take about 10 minutes until all settings are completed.-If an IP address conflict is detected when setting up an Internet connection, the setting may fail. In that case, please set on the Aterm WEB setting screen.-If the setting has been changed, review the setting information. Or initialize Aterm, restore the factory settings and run the app again.・ Settings may fail in an environment where other access points with connection settings are nearby. In that case, turn off the power of the access points other than the Aterm to set.-In the bridge mode, access point mode, and multi-stage connection of the router, Internet connection settings cannot be made correctly (Wi-Fi settings can be made).-After restarting the router, smartphones that do not complete Wi-Fi connection cannot be connected to the Internet. (Wi-Fi connection setting is possible)・ When making inquiries by e-mail, please set your e-mail filtering settings so that "[email protected]" can be received. Also, please note that we may not be able to answer inquiries other than this application.* QR code is a registered trademark of Denso Wave Incorporated.* This product includes software developed by the OpenSSL project to use the OpenSSL toolkit.Ver.2.0.16 インターネット接続処理を改善しました。